Cold Feed Rubber Extruder
Salient Features
- No warning mills are required as cold rubber can be feeded at room temperature thus saving power and labour.
- Scroll and lines made of en-41b, nitra hardened and polished.
- A special pressure melt transducer is provided which gives a
pressure indication on the head and also controls the screw rpm as per
the set pressure valve enabling extrusio at a consistent pressure
optional.
- Barels are steel fabricated jacketed for heating and cooling with replaceable liners.
- Feed rolls are specially designed for easy maintenance.
- Feeding arrangement with spiral undercut and feed roll arrangement provided which ensures proper bite and strip fed to screw.
- Automatic temperature controlling system.
Technical Specification
Model
|
BCF-45
|
BCF-60 |
BCF-75 |
BCF-90 |
BCF-115 |
BCF-150 |
Scroll Dia
|
45 MM
|
60 MM
|
75 MM |
90 MM |
115 MM |
150 MM |
L/D Ratio
|
10:1
|
10:1
|
12:1
|
16:1
|
16:1
|
16:1
|
Scroll Speed
|
6-60 RPM
|
6-60 RPM |
6-60 RPM |
6-60 RPM |
6-50 RPM |
6-40 RPM |
Electrical motor D/C or A/C variable drive
|
10 H.P
|
25 H.P |
40 H.P |
60 H.P |
100 H.P |
125 H.P |
Output per hour
|
40-60 KGS/HRS
|
100-150 KGS/HRS |
150-200 KGS/HRS |
300-800 KGS/HRS |
600-800 KGS/HRS |
800-1000KGS/HRS
|
Feeding
|
Hopper with spiral undercut and feed roll arrangement
|
Extruder head
|
STD Adaptor head and other heads are optional
|
Temperature controlling system
|
Two Zones
|
Three Zone
|
Thre Zone
|
Four Zones
|
Four Zones
|
Four Zones
|
Cooling water consumption
|
10 LPM
|
25 LPM
|
40 LPM
|
75 LPM
|
90 LPM
|
140 LPM
|
L/D Ratio, Scroll speeds, Motor power, Heating and Cooling Zones
other than given above can be provided on request. For Hard to Process
rubber compounds lower scroll speeds are provided with high power.
|
